0 CART
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…

Metabo HPT 30 Degree 3-1/4 In. Paper Tape Framing Nailer

Category Framing Nailer
DIB318914

Metabo HPT 30 Degree 3-1/4 In. Paper Tape Framing Nailer

Item Code: DIB318914
Category Framing Nailer
warning sign WARNING
Warning: Cancer and Reproductive Harm
Clipped head framer offers a selective trigger for non-bump fire nailing. Lightweight and well balanced for easy maneuverability, this 3-1/4" nailer fires through a day of framing without wearing out your wrists. A versatile driving port is designed to hose a wide range of nails for optimal versatility. Tool-less depth of drive adjustment for flush fastening. Cylinder valve drive system for rapid response and increased durability. Two-piece steel magazine withstands job site abuse. An innovative, open-nose design means easy extraction of the truly rare jammed nail. The nailer's hardened claw tip reduces wear and limits slippage when driving at a slanted angle. A selective actuation trigger (ANSI compliant), located on the trigger, allows transition from single actuation to contact actuation for optimal versatility. A soft rubber-grip offers more comfort and better control. Best of all, with a fire rate of 3 nails per second, you are sure to get that framing job done fast. Includes rafter hook.
Weight

11.65lb

Height

19.2in

Width

17.3in

Length

5in

Air Inlet

1/4 In. NPT

Brand

Metabo HPT

Category

Framing Nailer

Collation

Paper Tape

Corded/Cordless

Corded

Fastener Capacity

86 to 94 Nails

Fastener Type

Clipped Head or Offset Rouond

Firing Mode

Contact or Sequential

Height (in.)

14.1875

Length (in.)

18

Magazine Angle

30 degree

Magazine Load

Rear

Operating Pressure

70-120 psi

Power Type

Pneumatic

Warranty

5 Year

Weight (Lb.)

9

Width (In.)

4.25

This item is currently restricted. Please contact your purchasing dept or GOS
Compare

Metabo HPT 30 Degree 3-1/4 In. Paper Tape Framing Nailer

Category Framing Nailer
DIB318914

Metabo HPT 30 Degree 3-1/4 In. Paper Tape Framing Nailer

Item Code: DIB318914
Category Framing Nailer
warning sign WARNING
Warning: Cancer and Reproductive Harm
This item is currently restricted. Please contact your purchasing dept or GOS
Compare
Clipped head framer offers a selective trigger for non-bump fire nailing. Lightweight and well balanced for easy maneuverability, this 3-1/4" nailer fires through a day of framing without wearing out your wrists. A versatile driving port is designed to hose a wide range of nails for optimal versatility. Tool-less depth of drive adjustment for flush fastening. Cylinder valve drive system for rapid response and increased durability. Two-piece steel magazine withstands job site abuse. An innovative, open-nose design means easy extraction of the truly rare jammed nail. The nailer's hardened claw tip reduces wear and limits slippage when driving at a slanted angle. A selective actuation trigger (ANSI compliant), located on the trigger, allows transition from single actuation to contact actuation for optimal versatility. A soft rubber-grip offers more comfort and better control. Best of all, with a fire rate of 3 nails per second, you are sure to get that framing job done fast. Includes rafter hook.
Weight

11.65lb

Height

19.2in

Width

17.3in

Length

5in

Air Inlet

1/4 In. NPT

Brand

Metabo HPT

Category

Framing Nailer

Collation

Paper Tape

Corded/Cordless

Corded

Fastener Capacity

86 to 94 Nails

Fastener Type

Clipped Head or Offset Rouond

Firing Mode

Contact or Sequential

Height (in.)

14.1875

Length (in.)

18

Magazine Angle

30 degree

Magazine Load

Rear

Operating Pressure

70-120 psi

Power Type

Pneumatic

Warranty

5 Year

Weight (Lb.)

9

Width (In.)

4.25

SEARCH ×