0 CART
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…

SharkBite EvoPex 1/2 In. x 1/2 In. FPT Push-to-Connect Plastic Connector

DIB440692

SharkBite EvoPex 1/2 In. x 1/2 In. FPT Push-to-Connect Plastic Connector

Item Code: DIB440692
  • Fittings are rated up to 80 psi at 200 F, 100 psi at 180 F, and 160 psi at 73.4 F
  • Made of engineered polymer
warning sign WARNING
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This push-to-connect fitting with brass adapter on the opposite end is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue required. Designed for PEX only. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. Green indicator ring will display in the slots around the fitting to visually display that permanent inner-diameter connection is secure.
Weight

0.15lb

Height

0.9in

Width

4.75in

Length

6.75in

Brand

SharkBite

Category

Plastic Connector

Connection Type 1

Push

Connection Type 2

Female

Fitting Size 1

1/2 in.

Fitting Size 2

1/2 in.

Material

Plastic

Maximum Working Temperature (F)

200 / 73.4

Pressure Rating (psi)

80 / 160

This item is currently restricted. Please contact your purchasing dept or GOS
Compare

SharkBite EvoPex 1/2 In. x 1/2 In. FPT Push-to-Connect Plastic Connector

DIB440692

SharkBite EvoPex 1/2 In. x 1/2 In. FPT Push-to-Connect Plastic Connector

Item Code: DIB440692
  • Fittings are rated up to 80 psi at 200 F, 100 psi at 180 F, and 160 psi at 73.4 F
  • Made of engineered polymer
warning sign WARNING
WARNING: This product can expose you to chemicals including lead which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This item is currently restricted. Please contact your purchasing dept or GOS
Compare
This push-to-connect fitting with brass adapter on the opposite end is designed to make PEX-to-PEX connections in potable water and radiant heating (including underground or behind-the-wall) applications with no access panels required. No soldering, clamps, unions or glue required. Designed for PEX only. Insert PEX pipe into the fitting deep enough to be sealed by o-ring. Once inserted, stainless steel teeth bite down and grip the pipe. Green indicator ring will display in the slots around the fitting to visually display that permanent inner-diameter connection is secure.
Weight

0.15lb

Height

0.9in

Width

4.75in

Length

6.75in

Brand

SharkBite

Category

Plastic Connector

Connection Type 1

Push

Connection Type 2

Female

Fitting Size 1

1/2 in.

Fitting Size 2

1/2 in.

Material

Plastic

Maximum Working Temperature (F)

200 / 73.4

Pressure Rating (psi)

80 / 160

SEARCH ×