0 CART
items in your cartto quote Checkout
Ooops no items were found.
Try something else.
Ok
Loading…

ZAR Aqua Satin Water-Based Interior Polyurethane, 1 Gal.

DIB799102

ZAR Aqua Satin Water-Based Interior Polyurethane, 1 Gal.

Item Code: DIB799102
warning sign WARNING
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.
This nonyellowing, environmentally safe, clear wood finish is specially formulated to protect and beautify cabinets, furniture, wall paneling, woodwork, and moderately used floors. The water-based polyurethane dries crystal clear, making it an ideal finish to use over light-colored wood or white stains. Aqua Zar meets all environmental standards for low emission of solvent vapors. Use on properly prepared new wood. Remove any wax, lacquer, shellac, or paint completely from old surfaces before finishing. Do not use steel wool. Follow can instructions. If staining, apply a good quality oil-based or water-based stain. Apply with a clean synthetic fiber or foam brush, lamb's wool applicator or pad. Do not apply with a roller. Follow all directions on the label especially when applying to floors. Allow 24 hours to dry. Recommended to use Zar original polyurethane or ultra polyurethane for heavily used floors. Covers approximately 400 to 425 Sq. Ft. per gallon. Transparency: Clear.
Weight

10.25lb

Height

7.75in

Width

7.5in

Length

7.5in

Base Material

Water-Based

Brand

ZAR

Category

Interior Polyurethane

Clean-Up

Soap & Water

Container Size

1 gal.

Coverage Area (Sq. Ft.)

425

Dries To Touch

30 min.

Finish

Satin

Number Of Recommended Coats

3

Time Before Recoating

2 Hr.

This item is currently restricted. Please contact your purchasing dept or GOS
Compare

ZAR Aqua Satin Water-Based Interior Polyurethane, 1 Gal.

DIB799102

ZAR Aqua Satin Water-Based Interior Polyurethane, 1 Gal.

Item Code: DIB799102
warning sign WARNING
WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.
This item is currently restricted. Please contact your purchasing dept or GOS
Compare
This nonyellowing, environmentally safe, clear wood finish is specially formulated to protect and beautify cabinets, furniture, wall paneling, woodwork, and moderately used floors. The water-based polyurethane dries crystal clear, making it an ideal finish to use over light-colored wood or white stains. Aqua Zar meets all environmental standards for low emission of solvent vapors. Use on properly prepared new wood. Remove any wax, lacquer, shellac, or paint completely from old surfaces before finishing. Do not use steel wool. Follow can instructions. If staining, apply a good quality oil-based or water-based stain. Apply with a clean synthetic fiber or foam brush, lamb's wool applicator or pad. Do not apply with a roller. Follow all directions on the label especially when applying to floors. Allow 24 hours to dry. Recommended to use Zar original polyurethane or ultra polyurethane for heavily used floors. Covers approximately 400 to 425 Sq. Ft. per gallon. Transparency: Clear.
Weight

10.25lb

Height

7.75in

Width

7.5in

Length

7.5in

Base Material

Water-Based

Brand

ZAR

Category

Interior Polyurethane

Clean-Up

Soap & Water

Container Size

1 gal.

Coverage Area (Sq. Ft.)

425

Dries To Touch

30 min.

Finish

Satin

Number Of Recommended Coats

3

Time Before Recoating

2 Hr.

SEARCH ×

Search